White PET filmFilm rollWL-PET115EW9-EZ
SCITOP patented micro-cling and air-channel technology — a gecko-toe inspired, non-static design. Dot-pattern WALLIZARD® removable cling applies bubble-free to smooth surfaces and leaves no residue.
Full specifications
All values nominal ± tolerance, measured on standard production lots.
| Model | WL-PET115EW9-EZ |
|---|---|
| Base / Surface | White PET film, Matt white surface |
| Adhesion system | WALLIZARD® Gecko Toe Pad Cling Film |
| Print compatibility | Toner, Eco-solvent, UV Digital, Offset, Latex |
| Film thickness | 115±7 μm |
| Total thickness | 165±10 μm |
| Release liner thickness | ≈ 50 μm |
| Elongation at break | >80% |
| Dimensional stability | ≦0.1 in |
| Available sizes | Standard: 1370mm × 50m / 1370mm × 100m; 1520mm × 50m / 1520mm × 100m |
| Service temperature | -20~80 ℃ |
| Appearance | White |
| Indoor / outdoor | Indoor |
| Shelf life | Two years |
Installation
- The application area should be clean and free of dirt.
- Using water to assist applying the material is not necessary and not recommended.
Storage
- Store at temperature conditions of 10～25℃ (50～77℉) and 50% relative humidity.
- We recommended that you always keep this product in its original packaging.
Cautions
- To optimize print results, set the printer to its best print mode before printing.
- Avoid hand oil and dirt contaminating the print surface.
- Keep the film flat during application — creases and wrinkles will affect cling.
- Due to different applying surfaces and environments, we cannot guarantee the material will work in every condition. Please test on the applying surface before large-scale use.
Where WL-PET115EW9-EZ goes to work
Common questions about WL-PET115EW9-EZ
Q1What is gecko toe pad cling technology in WALLIZARD® film?
WALLIZARD® uses SCITOP's patented cling technology — micro-cling and air-channel construction with a gecko-toe inspired, non-static, dot-pattern removable cling. It applies to most clean smooth surfaces such as glass, stainless steel and acrylic, and removes with absolutely no residue, even after long application periods.
Q2Can WALLIZARD® film be used outdoors?
No. WALLIZARD® is designed for indoor use — short- and long-term applications such as seasonal retail promotions, trade shows, office posters and signage, on most clean, smooth surfaces such as glass and metal. For outdoor graphics, ask us about the AC series models rated for indoor & outdoor use.
Q3Is WALLIZARD® film reusable?
Yes. WALLIZARD® is removable, repositionable and reusable. The micro-cling and air-channel backing keeps its grip through repeated applications, and installation needs no water and no skilled labour — bubble-free by design.
Q4How do you install WALLIZARD® film?
The surface must be smooth, clean and free of dirt. Do not use water. After positioning, squeegee evenly with a cloth from one narrow edge to the other so the film lies flat with no internal stress. Recommended graphic size: no larger than 3.0 m² per sheet.
Other models in this series
11 models in total — view the full comparison table →
Not sure this model fits?
Use the guided finder to shortlist models by surface, duration, installation and print system.
Test WL-PET115EW9-EZ on your own printer
We ship A4 and roll samples worldwide. Tell us your printer model and target surface — our engineers will confirm compatibility and quote within one working day.